Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › from 2021.02
RM33C0E _58 Vehicle Interior _065466 INTERIOR PANELS / TRIM _0331455 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  DISASSEMBLY  


PROCEDURE

Hide 73960A 1.REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

Hide 55971C 2.REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

a.
B469276C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the screw <E>.


b.

Disengage the 2 guides as shown in the illustration.


c.
B469278C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claw to remove the No. 1 side defroster nozzle duct as shown in the illustration.


Hide 55972C 3.REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

a.
B469280C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the 2 screws <E>.


b.

Disengage the 2 guides as shown in the illustration.


c.
B469282C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claw to remove the No. 2 side defroster nozzle duct as shown in the illustration.


Hide 55950G 4.REMOVE DEFROSTER NOZZLE ASSEMBLY

a.
B606470

Remove the 3 screws <E> and defroster nozzle assembly.


Hide 83108 5.REMOVE METER MIRROR SUB-ASSEMBLY (w/ Headup Display)

Hide 55084E 6.REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

a.
B606471

Remove the 2 screws <E> and No. 1 heater to register duct sub-assembly.


Hide 55086 7.REMOVE NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

a.
B606472

Remove the 2 screws <E> and No. 3 heater to register duct sub-assembly.


Hide 8.REMOVE NAVIGATION ANTENNA ASSEMBLY WITH BRACKET (w/ Navigation Antenna)

Hide 89120A 9.REMOVE AUTOMATIC LIGHT CONTROL SENSOR

Hide 82143 10.REMOVE NO. 3 INSTRUMENT PANEL WIRE

a.
B606527

Disengage the clamp to remove the No. 3 instrument panel wire.


Hide 55417B 11.REMOVE RADIO TUNER FINISH RETAINER

a.
B606528

Remove the 5 screws <E> and radio tuner finish retainer.


Hide 83107A 12.REMOVE NO. 1 METER BRACKET SUB-ASSEMBLY

a.
B469290

Remove the screw <E> and No. 1 meter bracket sub-assembly.


Hide 83107B 13.REMOVE NO. 2 METER BRACKET SUB-ASSEMBLY (w/ Headup Display)

a.
B480816

Remove the screw <E> and No. 2 meter bracket sub-assembly.


Hide 55981 14.REMOVE NO. 1 DEFROSTER NOZZLE GARNISH

a.

Disengage the 4 clips.

B469291


b.

Disengage the 5 guides to remove the No. 1 defroster nozzle garnish.

B469292


Hide 15.REMOVE INSTRUMENT PANEL HOLE COVER (w/ Headup Display)

a.
B480819

Disengage the 5 claws.


b.
B480820

Disengage the 3 guides to remove the instrument panel hole cover.


Hide 55328 16.REMOVE NO. 1 INSTRUMENT PANEL PIN

a.
B469293

Remove the 4 screws <E> and 4 No. 1 instrument panel pins.


Hide 86101 17.REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)

Hide 86101 18.REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)

Hide 87201N 19.REMOVE AIR DUCT SUB-ASSEMBLY (w/ Ion Generator)

Hide 20.REMOVE ION GENERATOR WITH BRACKET (w/ Ion Generator)

Hide 82144 21.REMOVE NO. 4 INSTRUMENT PANEL WIRE (w/ Ion Generator)

a.
B482078

Disengage the 2 clamps to remove the No. 4 instrument panel wire.


Hide 22.REMOVE INSTRUMENT PANEL CUSHION

a.
B469294

Remove the instrument panel cushion.


Hide 69550A 23.REMOVE GLOVE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY

a.

Move the glove compartment door lever as shown in the illustration.

B575726C01
0,0 0,0 false
V113147

Move in this Direction - -



b.
B575727C01
1.083,3.115 1.354,3.219 true 1.396,3.156 1.708,3.313 0.313,0.156 10 false *a
*a Cylinder Lock Plate
V113147

Remove in this Direction


Using a screwdriver, press the cylinder lock plate to release it and pull out the glove compartment door lock cylinder assembly from the glove compartment door lever to remove it as shown in the illustration.