Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2021.02
RM33C0E _51 Engine / Hybrid System _065434 CRUISE CONTROL _0328967 DYNAMIC RADAR CRUISE CONTROL SYSTEM C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  P160700  Cruise Control Input Processor  


DESCRIPTION

When the hybrid vehicle control ECU assembly detects that it is not functioning normally, DTC P160700 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
P160700 Cruise Control Input Processor When the power switch is on (IG) and control of vehicle speed by the dynamic radar cruise control system is prohibited by the sub-CPU, the dynamic radar cruise control system operates for 0.3 seconds or more. Hybrid vehicle control ECU assembly Cruise Control

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the hybrid vehicle control ECU assembly, refer to Service Bulletin.


HINT:

Read the freeze frame data using the GTS. When a malfunction is detected, various engine control parameters are stored as freeze frame data and can be useful for troubleshooting.


PROCEDURE

1.CHECK FOR DTCs (Radar Cruise1)
a.

Clear the DTCs.

Powertrain > Cruise Control > Clear DTCs
50002 399

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



c.

Check for DTCs.

Powertrain > Cruise Control > Trouble Codes
50001 399

Result:
Result Proceed to
DTC P160700 is not output A
DTC P160700 is output B



A

B

REPLACE HYBRID VEHICLE CONTROL ECU ASSEMBLY