86140A
1.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY
86211
2.INSTALL NO. 1 RADIO RECEIVER BRACKET
Install the No. 1 radio receiver bracket with the 2 screws.
86212
3.INSTALL NO. 2 RADIO RECEIVER BRACKET
Install the No. 2 radio receiver bracket with the 2 screws.
55422C
4.INSTALL CENTER INSTRUMENT CLUSTER FINISH UPPER PANEL ASSEMBLY (for 7 Inch Display)
|
Install in this Direction |
Engage the 3 clips to install the center instrument cluster finish upper panel assembly as shown in the illustration.
5.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 7 Inch Display)
Connect each connector.
|
Install in this Direction |
Engage the 2 guides to temporarily install the radio and display receiver assembly with bracket as shown in the illustration.
|
Install in this Direction |
Engage the 2 clips and 2 claws as shown in the illustration.
Install the radio and display receiver assembly with bracket with the 4 bolts.
Engage the clamp.
6.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 9 Inch Display)
Connect each connector.
|
Install in this Direction |
Engage the 2 guides to temporarily install the radio and display receiver assembly with bracket as shown in the illustration.
|
Install in this Direction |
Engage the 5 clips as shown in the illustration.
Install the radio and display receiver assembly with bracket with the 4 bolts.
Engage the clamp.
7.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
55405B
8.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 7 Inch Display)
55405B
9.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 9 Inch Display)
55480D
10.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
55900
11.INSTALL AIR CONDITIONING CONTROL ASSEMBLY