Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › from 2021.02
RM33C0E _58 Vehicle Interior _065466 INTERIOR PANELS / TRIM _0331455 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  INSTALLATION  


PROCEDURE

Hide 1.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

a.

When installing a new instrument panel safety pad sub-assembly:

i.

Immediately before installing the instrument panel safety pad sub-assembly, twist and cut off the portion as shown in the illustration.

B602968



b.

Engage the 4 guides to temporarily install the instrument panel safety pad sub-assembly as shown in the illustration.

B606469C02
0,0 0,0 false
V113147

Install in this Direction - -


NOTICE:
·

Do not damage the instrument panel safety pad sub-assembly.

·

Do not allow the wire harnesses to interfere with the surrounding parts.




c.

Install the instrument panel safety pad sub-assembly with the 4 bolts <B>, 2 bolts <A> and nut <F>.

B606467C04
5.271,6.323 5.458,6.479 0.188,0.156 10 true *a 2.052,4.563 2.229,4.719 0.177,0.156 10 true *b 0.906,0.688 1.219,0.844 0.313,0.156 10 false *c 3.438,2.563 3.625,2.719 0.188,0.156 10 true *d 5.385,0.156 5.698,0.313 0.313,0.156 10 false *c 4.563,4.052 4.74,4.208 0.177,0.156 10 true *b 5.333,3.958 5.51,4.115 0.177,0.156 10 true *b 6.688,2.823 6.865,2.979 0.177,0.156 10 true *b 6.271,6.344 6.458,6.5 0.188,0.156 10 true *a
*a Bolt <A> *b Bolt <B>
*c Clip *d Nut <F>


Torque:
Bolt<A> : 20 N*m (204 kgf*cm, 15 ft.*lbf)


d.

Install the 2 clips.


e.

Engage each clamp.

B606526C01
3.656,0.167 3.906,0.385 0.25,0.219 12 true *A 0.135,5.115 0.375,5.333 0.24,0.219 12 true *B 1.875,5.063 2.115,5.26 0.24,0.198 12 true *C 3.667,5.042 3.885,5.25 0.219,0.208 12 true *D
*A w/o Radio Receiver *B w/ Ion Generator
*C w/ Headup Display *D w/ Telematics Transceiver or Navigation System



f.

Connect each connector.


g.
B469268C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 claws to connect the cooler (room temp. sensor) thermistor as shown in the illustration.


Hide 82149A 2.CONNECT NO. 5 INSTRUMENT PANEL WIRE (w/o Occupant Classification System)

Hide 82149A 3.CONNECT NO. 5 INSTRUMENT PANEL WIRE (w/ Occupant Classification System)

Hide 55650 4.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

a.
B469266C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 clips and 2 claws to install the No. 1 instrument panel register assembly as shown in the illustration.


Hide 55011A 5.INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

a.
B469264C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 clips to install the No. 1 instrument panel garnish sub-assembly as shown in the illustration.


Hide 86160P 6.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)

HINT:

Use the same procedure as for the LH side.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSTALLATION


Hide 55473B 7.INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL

a.
B469261C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides as shown in the illustration.


b.
B469262C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 clips to install the No. 2 instrument panel speaker panel as shown in the illustration.


Hide 86160P 8.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)

Hide 55472C 9.INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL

a.
B469257C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides as shown in the illustration.


b.
B469258C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 clips to install the No. 1 instrument panel speaker panel as shown in the illustration.


Hide 55303B 10.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/o Passenger Side Knee Airbag)

a.

w/ Illumination:

i.

Connect the connector.



b.
B606463C02
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 claws as shown in the illustration.


c.

Install the 2 bolts <D>.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


d.

Install the lower instrument panel sub-assembly with the 3 screws <C>.


Hide 55303B 11.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/ Passenger Side Knee Airbag)

a.

Connect the connector.


b.
B606466C02
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 claws as shown in the illustration.


c.

Install the lower instrument panel sub-assembly with the 5 screws <C>.


Hide 73990 12.INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)

Hide 55607 13.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Connect the connector.


b.

Engage the clamp.


c.
B469251C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides as shown in the illustration.


d.
B469249C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 claws to install the No. 2 instrument panel under cover sub-assembly as shown in the illustration.


Hide 55317A 14.INSTALL INSTRUMENT SIDE PANEL RH

a.
B606460C02
0,0 0,0 false
V113147

Install in this Direction


Engage the 3 guides as shown in the illustration.


b.
B469245C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 clips and 2 claws to install the instrument side panel RH as shown in the illustration.


Hide 62211 15.INSTALL FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 62211 16.INSTALL FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 62311B 17.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

Hide 62111A 18.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 67913 19.INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 20.INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)

a.

Connect the connector.


b.

Engage the 2 guides.


c.

Install the radio tuner opening cover with bracket with the 4 bolts <B>.


Hide 55422C 21.INSTALL CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL (w/o Radio Receiver)

a.
B605407C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 clips as shown in the illustration.


b.

Install the center upper instrument cluster finish panel with the 2 clips.


Hide 22.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 7 Inch Display)

Hide 23.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for 9 Inch Display)

Hide 55420A 24.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

a.

Connect each connector.


b.

Engage the 2 claws and 4 clips as shown in the illustration.

B606525C01
0,0 0,0 false
V113147

Install in this Direction - -



c.

Engage the 4 clips in the order shown in the illustration to install the center instrument cluster finish panel assembly.

B606523C01
3.354,1.385 3.479,1.563 0.125,0.177 10 true 1 3.896,1.396 4.021,1.573 0.125,0.177 10 true 2 4.5,1.458 4.625,1.635 0.125,0.177 10 true 3 5.042,1.49 5.167,1.667 0.125,0.177 10 true 4
V113147

Install in this Direction - -



Hide 55405B 25.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Radio Receiver)

a.
B605423C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 3 claws and 5 clips to install the center instrument cluster finish panel sub-assembly as shown in the illustration.


Hide 55405B 26.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 7 Inch Display)

a.
B606519C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 claws and 7 clips to install the center instrument cluster finish panel sub-assembly as shown in the illustration.


Hide 55405B 27.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 9 Inch Display)

a.
B606521C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 3 clips to install the center instrument cluster finish panel sub-assembly as shown in the illustration.


Hide 55900 28.INSTALL AIR CONDITIONING CONTROL ASSEMBLY

Hide 55670 29.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

a.

w/ Illumination:

i.

Connect the connector.



b.

Engage the 11 clips to install the No. 3 instrument panel register assembly as shown in the illustration.

B592633C01
0,0 0,0 false
V113147

Install in this Direction - -



Hide 55480D 30.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

a.

Connect the connector.


b.
B606479C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 5 clips to install the lower instrument panel finish panel assembly as shown in the illustration.


Hide 83100 31.INSTALL COMBINATION METER ASSEMBLY

Hide 55410C 32.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

a.

Connect the connector.


b.
B606477C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides and 4 clips to install the instrument cluster finish panel assembly as shown in the illustration.


c.

Install the 2 clips.


Hide 73900 33.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)

Hide 55302D 34.INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)

a.

Connect each connector.


b.

Engage the clamp.


c.
B482061C02
0,0 0,0 false
V113147

Install in this Direction


Engage the 8 clips to install the No. 1 instrument panel sub-assembly as shown in the illustration.


Hide 55302D 35.INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/ Driver Side Knee Airbag)

a.

Connect each connector.


b.

Engage the clamp.


c.
B482055C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 6 clips to install the No. 1 instrument panel sub-assembly as shown in the illustration.


Hide 53601 36.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.

Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.


Hide 55436B 37.INSTALL NO. 2 METER HOOD CLUSTER

a.
B469229C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 3 clips to install the No. 2 meter hood cluster as shown in the illustration.


Hide 55606 38.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

a.

Engage the 2 claws to connect the DLC3 connector.


b.

Engage the 2 clamps.


c.

Connect the connector.


d.
B482056C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guide as shown in the illustration.


e.
B482057C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 3 claws as shown in the illustration.


f.

Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <C>.


Hide 55606 39.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

a.

Engage the 2 claws to connect the DLC3 connector.


b.

Engage the clamp.


c.

Connect the connector.


d.
B480746C02
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 claws as shown in the illustration.


e.

Install the No. 1 instrument panel under cover sub-assembly with the 3 screws <C>.


Hide 55318C 40.INSTALL INSTRUMENT SIDE PANEL LH

a.
B606450C02
0,0 0,0 false
V113147

Install in this Direction


Engage the 3 guides as shown in the illustration.


b.
B482059C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 clips and 2 claws to install the instrument side panel LH as shown in the illustration.


Hide 62212 41.INSTALL FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag)

Hide 62212 42.INSTALL FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag)

Hide 62312B 43.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62112A 44.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

Hide 67914 45.INSTALL FRONT DOOR SCUFF PLATE LH

Hide 58810J 46.INSTALL CONSOLE BOX ASSEMBLY

Hide 84329 47.INSTALL TURN SIGNAL SWITCH

Hide 84650 48.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

Hide 45286B 49.INSTALL UPPER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column)

Hide 45286B 50.INSTALL UPPER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)

Hide 45024 51.INSTALL LOWER STEERING COLUMN COVER SUB-ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column)

Hide 45024 52.INSTALL LOWER STEERING COLUMN COVER SUB-ASSEMBLY (for Power Tilt and Power Telescopic Steering Column)

Hide 53.ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

Hide 84306 54.INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

Hide 55.INSTALL STEERING WHEEL ASSEMBLY

Hide 56.CHECK STEERING WHEEL CENTER POINT

Hide 45130 57.INSTALL HORN BUTTON ASSEMBLY

Hide 58. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)