Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TELEVISION CAMERA (for Rear) › from 2021.02
RM33C0E _56 Audio / Visual / Telematics _065452 PARK ASSIST / MONITORING _0334381 TELEVISION CAMERA(for Rear) A

PARK ASSIST / MONITORING  TELEVISION CAMERA(for Rear)  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function When Necessary Procedures are not Performed Link

*1: Applies only for when removing and installing or replacing the rear television camera assembly.

w/ Parking Assist Monitor System

Rear television camera assembly


·

Parking assist monitor system initialization

·

Rear television camera assembly optical axis (Back camera position setting)


Parking Assist Monitor System (Click here)
w/ Panoramic View Monitor System

Rear television camera assembly


·

Rear television camera view adjustment

·

Rear television camera assembly optical axis (Back camera position setting)


Panoramic View Monitor System (Click here)
Replacement or removal and installation of 2 or more parts:
·

Front television camera assembly, front bumper assembly or radiator grille

·

Rear television camera assembly

·

Side television camera assembly LH or outer rear view mirror assembly LH

·

Side television camera assembly RH or outer rear view mirror assembly RH


·

Television camera view adjustment

·

Rear television camera assembly optical axis (Back camera position setting)*1



PROCEDURE

Hide 76801A 1.REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

Hide 2.REMOVE REAR TELEVISION CAMERA ASSEMBLY WITH WIRE

a.
E365382

Disconnect the connector.


b.

Disengage the clamp.


c.
E365383C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 2 claws to remove the rear television camera assembly with wire as shown in the illustration.


Hide 86799 3.REMOVE TELEVISION CAMERA WIRE

a.
E365385

Disconnect the connector to remove the television camera wire.


Hide 86790D 4.REMOVE REAR TELEVISION CAMERA ASSEMBLY