Home › Engine / Hybrid System › N04C-UH (ENGINE CONTROL) › ECD SYSTEM
RM2850E _51 Engine / Hybrid System _073137 N04C-UH ENGINE CONTROL _0355844 ECD SYSTEM C

N04C-UH ENGINE CONTROL  ECD SYSTEM  P0630  VIN not Programmed or Mismatch - ECM / PCM  


DESCRIPTION

DTC P0630 is stored when the Vehicle Identification Number (VIN) is not stored in the Engine Control Module (ECM) or the input VIN is not accurate. Input the VIN with the intelligent tester.

DTC No. DTC Detection Condition Trouble Area
P0630
·

VIN not stored in ECM

·

Input VIN in ECM not accurate


(1 trip detection logic)
ECM

PROCEDURE

1.CHECK DTC OUTPUT
a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the tester on.


d.

Enter the following menus: Powertrain / Engine and ECT / DTC.


e.

Read the DTCs.

Result:
Result Proceed to
P0630 A
P0630 and other DTCs B


If any DTCs other than P0630 are output, troubleshoot those DTCs first.

NOTICE:

If P0630 is stored, the VIN must be input to the ECM using the intelligent tester. However, all DTCs are cleared automatically by the tester when inputting the VIN. If DTCs other than P0630 are stored, check them first.




A

2.INSPECT VIN WITH INTELLIGENT TESTER

B

2.INSPECT VIN WITH INTELLIGENT TESTER

Result:
Proceed to
NEXT



NEXT

END