Home › Engine / Hybrid System › N04C-VQ (ENGINE CONTROL) › ACCELERATOR PEDAL
RM2850E _51 Engine / Hybrid System _073138 N04C-VQ ENGINE CONTROL _0355857 ACCELERATOR PEDAL A

N04C-VQ ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78100 1.REMOVE ACCELERATOR PEDAL ASSEMBLY

a.
A146664E01
2.583,0.095 2.81,0.379 0.227,0.284 2.583,0.095 2.81,0.379 0.227,0.284 1.097,1.288 1.406,1.488 0.309,0.2 0.772,0.593 1.084,0.785 0.312,0.191 0.772,0.593 1.084,0.785 0.312,0.191

Disconnect the accelerator pedal connector.


b.

Remove the 2 bolts and accelerator pedal assembly.

NOTICE:
·

This accelerator pedal assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal assembly. If applied, the accelerator pedal assembly must be replaced.

·

Do not drop or strike the accelerator pedal assembly.

·

Do not disassemble the accelerator pedal assembly.