Home › Engine / Hybrid System › N04C-VQ (ENGINE CONTROL) › ACCELERATOR PEDAL
RM2850E _51 Engine / Hybrid System _073138 N04C-VQ ENGINE CONTROL _0355857 ACCELERATOR PEDAL A

N04C-VQ ENGINE CONTROL  ACCELERATOR PEDAL  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

This accelerator pedal assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal assembly. If applied, the accelerator pedal assembly must be replaced.

·

Avoid any physical shock to the accelerator pedal assembly.

·

Do not disassemble the accelerator pedal assembly.



PROCEDURE

Hide 78100 1.INSTALL ACCELERATOR PEDAL ASSEMBLY

a.

Install the accelerator pedal assembly with the 2 bolts.

Torque:

18 N*m (184 kgf*cm, 13 ft.*lbf)



b.

Connect the accelerator pedal connector.