Home › Engine / Hybrid System › N04C-VQ (ENGINE CONTROL) › MASS AIR FLOW METER
RM2850E _51 Engine / Hybrid System _073138 N04C-VQ ENGINE CONTROL _0355858 MASS AIR FLOW METER G

N04C-VQ ENGINE CONTROL  MASS AIR FLOW METER  INSPECTION  


PROCEDURE

Hide 22204 1.INSPECT MASS AIR FLOW METER

a.
A265360E02
0.542,0.667 1.156,0.979 1.156,0.979 0.698,0.667 false 1.198,0.927 1.448,1.146 0.25,0.219 10 false *a

Using a work light, check that the platinum filament (heater portion) and temperature sensing element in the mass air flow meter has no foreign matter attached.

Text in Illustration
*a Platinum filament (heater) and temperature sensing element

OK:

No foreign matter attached.


If the result is not as specified, replace the mass air flow meter.


b.
A127786E32
2.175,0.645 2.417,0.815 0.242,0.170 10 E2 3.033,0.645 3.362,0.801 0.330,0.156 10 THA 0.045,0.037 0.233,0.210 0.188,0.173 10 *a 2.924,1.451 2.924,0.732 2.924,0.732 3.001,0.732 false 2.777,1.462 2.581,0.726 2.581,0.726 2.453,0.726 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (THA) - 2 (E2) -20°C (-4°F) 13.6 to 18.4 kΩ
20°C (68°F) 2.21 to 2.69 kΩ
60°C (140°F) 0.49 to 0.67 kΩ


Text in Illustration

If the result is not as specified, replace the mass air flow meter.

*a Component without harness connected (Mass Air Flow Meter)