83420
1.INSPECT ENGINE COOLANT TEMPERATURE SENSOR
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected (Engine Coolant Temperature Sensor) |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the engine coolant temperature sensor. |
||
| 1 (THW) - 2 (E2) | 20°C (68 °F) | 2.32 to 2.59 kΩ |
| 80°C (176 °F) | 0.310 to 0.326 kΩ | |
When checking the engine coolant temperature sensor in water, keep the terminals dry. After the check, wipe the sensor dry.