1.DISCONNECT CABLE FROM NEGATIVE TERMINAL
2.DRAIN AUTOMATIC TRANSMISSION FLUID
35013
3.REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY
35106
4.REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
Remove the 20 bolts.
Loosen the bolts equally.
Insert a oil pan seal cutter between the transmission case and oil pan. Cut through the seal and remove the oil pan.
Be careful not to damage the oil pan flange.
Do not drop the oil pan.
Remove the 4 transmission oil cleaner magnets from the oil pan.
Confirm the position of the magnets.
35330
5.REMOVE VALVE BODY OIL STRAINER ASSEMBLY
Remove the 4 bolts and oil strainer.
Loosen the bolts equally.
35261A
6.REMOVE THROTTLE PRESSURE ACCUMULATOR CYLINDER
Remove the bolt and clamp.(A)
Remove the 2 bolts and throttle pressure accumulator cylinder.(B)
Remove the center support apply gasket.
82125J
7.DISCONNECT TRANSMISSION WIRE
Disconnect the 5 connectors from the solenoid valves.(A)
Disconnect the ATF temperature sensor's clamp.(B)
35410
8.REMOVE TRANSMISSION VALVE BODY ASSEMBLY
Remove the 21 bolts and transmission valve body assembly.
Do not drop the accumlator piston and spring.
Do not drop the manual valve.
35893
9.REMOVE CENTER SUPPORT APPLY GASKET
Remove the 4 center support apply gaskets.