Home › Drivetrain › A444E (AUTOMATIC TRANSMISSION / TRANSAXLE) › TRANSMISSION CONTROL CABLE › 2017.01–2021.01
RM2850E _52 Drivetrain _073139 A444E AUTOMATIC TRANSMISSION / TRANSAXLE _0355872 TRANSMISSION CONTROL CABLE A

A444E AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 1.SECURE VEHICLE

a.
C368705

Fully apply the parking brake and chock a wheel.

CAUTION:
·

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 58521D 2.REMOVE ENGINE SERVICE HOLE COVER MAT (w/ Carpet)

Hide 58410 3.REMOVE ENGINE SERVICE HOLE COVER

Hide 33820B 5.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C102377

Remove the clip and washer and disconnect the transmission control cable assembly from the transmission floor shift assembly.


b.
C178308

Remove the clip.


c.

Remove the bolt and clamp.


d.
C103013

Remove the nut, washer and clip.


e.

Remove the transmission control cable assembly.