Home › Drivetrain › A444E (AUTOMATIC TRANSMISSION / TRANSAXLE) › CENTER SUPPORT ASSEMBLY › 2017.01–2021.01
RM2850E _52 Drivetrain _073139 A444E AUTOMATIC TRANSMISSION / TRANSAXLE _0355882 CENTER SUPPORT ASSEMBLY A

A444E AUTOMATIC TRANSMISSION / TRANSAXLE  CENTER SUPPORT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 35709B 1.INSTALL CENTER SUPPORT O-RING

a.
C175607

Coat 3 new center support O-rings with ATF.


b.

Install the 3 new center support O-rings to the center support sub-assembly.


Hide 35785 2.INSTALL CENTER SUPPORT RING RETAINER

a.
C175608

Coat 3 new center support ring retainers with ATF.


b.

Install the 3 new center support ring retainers to the center support sub-assembly.


Hide 35709C 3.INSTALL CENTER SUPPORT OIL SEAL RING

a.
Q002871

Coat 2 new center support oil seal rings with ATF.


b.

Install the 2 new center support oil seal rings to the center support sub-assembly.

NOTICE:
·

Do not expand the oil seal ring ends excessively.

·

If there is any scratch or deformation on the oil seal ring, replace it with a new one.




Hide 35621 4.INSTALL BRAKE PISTON NO.1

a.
C087637

Coat 2 new No.1 brake piston O-rings with ATF.


b.

Install the 2 new No.1 brake piston O-rings to the No.1 brake piston.


c.
AT04011

Install the No.1 brake piston to the center support sub-assembly.

NOTICE:

Be careful not to damage the O-ring.



Hide 5.INSTALL 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY

a.
Q002873

Install the 2nd brake piston return spring sub-assembly.


b.
C403423E01
0.802,0.688 0.99,0.688 0.99,0.688 1.302,1.333 false 0.479,0.615 1.198,1.021 0.719,0.406 10 false SST

Using a SST and press, shorten the 2nd brake piston return spring sub-assembly.

SST
09350-36010  (09350-06020)


c.

Using a screwdriver, install the brake piston return spring hole snap ring.

NOTICE:

Stop the press at the position where the spring sheet face is 1 to 2 mm lower than the snap ring.



Hide 35632C 6.INSTALL BRAKE CLUTCH DISC

a.
C175627

Coat 5 brake clutch discs, 5 brake pistons with ATF.


b.

Install the 5 brake clutch discs, 5 brake piston to the center support sub-assembly.

HINT:

Before assembling new clutch discs, soak them in ATF for more than 2 hours.



c.
Q002870

Install the No.1 brake flange to the center support sub-assembly.


d.
Q002880

Using a screwdriver, install the No.1 brake flange hole snap ring.


Hide 35706P 8.INSTALL FRONT PLANETARY SUN GEAR SUB-ASSEMBLY

a.
Q002866

Install the front planetary sun gear sub-assembly to the center support sub-assembly.


b.
C403310

Using a No.1 snap ring expander, install the front planetary sun gear shaft snap ring.