35606
1.INSTALL REAR CLUTCH PISTON SUB-ASSEMBLY
Coat 2 new rear clutch piston O-rings with ATF.
Install the 2 new rear clutch piston O-rings.
Be careful not to damage the rear clutch piston O-ring.
Install the rear clutch piston sub-assembly.
Be careful not to damage the O-ring.
35604
2.INSTALL DIRECT CLUTCH RETURN SPRING SUB-ASSEMBLY
Install the direct clutch return spring sub-assembly.
Using a SST and press, shorten the direct clutch return spring sub-assembly, and then install the direct clutch piston shaft hole snap ring.
Stop the press at the position where the spring sheet face is 1 to 2 mm lower than the snap ring.
35673
3.INSTALL REAR CLUTCH DISC
Coat the 5 rear clutch discs, 5 rear clutch plates with ATF.
Install the 5 rear clutch discs, 5 rear clutch plates.
Before assembling new discs, soak them in ATF for at least 2 hours.
Install the rear clutch flange.
Using a screwdriver, install the rear clutch flange hole snap ring.
4.INSPECT PISTON STROKE OF REAR CLUTCH