16361A
1.INSTALL FAN AND GENERATOR V BELT
Install the fan and generator V belt.
Turn the adjusting B bolt and adjust the tension of the fan and generator V belt (See page ).
Tighten the A bolt.
44 N*m (449 kgf*cm, 32 ft.*lbf)
Tighten the B bolt.
6.0 N*m (61 kgf*cm, 53 in.*lbf)
2.INSTALL NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT (w/ Air Conditioning System)
Install the No. 1 V (cooler compressor to crankshaft pulley) belt.
Turn the adjusting B bolt and adjust the tension of the No. 1 V (cooler compressor to crankshaft pulley) belt (See page ).
Tighten the A bolt.
44 N*m (449 kgf*cm, 32 ft.*lbf)
Tighten the B bolt.
6.0 N*m (61 kgf*cm, 53 in.*lbf)
3.INSPECT FOR DRIVE BELT
51446C
4.INSTALL ENGINE UNDER COVER BRACKET LH
Install the engine under cover bracket LH with the 2 bolts.
21 N*m (214 kgf*cm, 15 in.*lbf)
51445D
5.INSTALL ENGINE UNDER COVER BRACKET RH
Install the engine under cover bracket RH with the 2 bolts.
21 N*m (214 kgf*cm, 15 in.*lbf)
51441D
6.INSTALL NO. 1 ENGINE UNDER COVER
Install the No. 1 engine under cover with the 2 screws and 4 bolts.
18 N*m (184 kgf*cm, 13 ft.*lbf)
|
Bolt |
|
Screw |