1.INSTALL FRONT CRANKSHAFT OIL SEAL
Apply MP grease to the front crankshaft oil seal lip.
Using SST and a hammer, tap in a new front crankshaft oil seal to the timing gear cover so that the front crankshaft oil seal is flush with the timing gear edge.
Be careful not to tap the front crankshaft oil seal at an angle.
Keep the gap between the gear case edge and the front crankshaft oil seal free of foreign matter.
13470
2.INSTALL CRANKSHAFT PULLEY ASSEMBLY
16701
3.INSTALL FAN SHROUD SUB-ASSEMBLY