16371
1.INSTALL FAN PULLEY
Install the fan pulley to the engine water pump assembly.
16361
2.INSTALL FAN
Install the fan to the fluid coupling assembly with the 4 nuts.
11 N*m (112 kgf*cm, 8 ft.*lbf)
16701
3.INSTALL FAN SHROUD SUB-ASSEMBLY
Temporarily install the fan shroud sub-assembly together with the fluid coupling assembly.
Be careful not to damage the radiator core.
Install the fan shroud sub-assembly with the 4 bolts.
5.0 N*m (51 kgf*cm, 44 ft.*lbf)
Install the fluid coupling assembly with the 4 nuts.
29 N*m (291 kgf*cm, 21 ft.*lbf)
Engage the 3 hose clamps and install the radiator reservoir hose.
Engage the hose clamp and install the No. 1 intercooler air hose.
16572
4.CONNECT OUTLET RADIATOR HOSE
Connect the outlet radiator hose and slide the 2 hose clamps to secure the hose.
| *a | View A |
| *b | View B |
| *c | Upper Side |
| *d | RH Side |
| *e | LH Side |
Perform the installation with the hose clamp at the correct angle.
16361A
5.INSTALL FAN AND GENERATOR V BELT
58701A
6.INSTALL FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY
33506F
7.INSTALL FLOOR SHIFT CONTROL SHIFT LEVER RETAINER SUB-ASSEMBLY
58123A
8.INSTALL SHIFT AND SELECT LEVER SUPPORT WITH BOOTS
58420
9.INSTALL NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY
58734B
10.INSTALL REAR ENGINE SERVICE COVER WEATHERSTRIP
58410
11.INSTALL ENGINE SERVICE HOLE COVER
58521D
12.INSTALL ENGINE SERVICE HOLE COVER MAT
13.ADD ENGINE COOLANT
14.INSPECT FOR COOLANT LEAK