23300D
1.INSTALL DIESEL FUEL FILTER ASSEMBLY
Check and clean the diesel fuel filter installation surface.
Apply clean fuel to the O-ring of a new diesel fuel filter assembly.
Tighten the fuel filter by hand until the O-ring contacts the installation surface.
Using the hexagonal portion of the fuel filter, tighten the diesel fuel filter assembly.
42 N*m (428 kgf*cm, 31 ft.*lbf)
2.INSTALL NO. 3 NOZZLE LEAKAGE PIPE SUB-ASSEMBLY
Install new 2 gaskets and the No. 3 nozzle leakage pipe sub-assembly with the 2 union bolts.
13 N*m (133 kgf*cm, 10 ft.*lbf)
Install the fuel pipe clamp with the nut.
Tighten the nut until the clamp edges make contact with the engine side clamp edges.
23803H
3.CONNECT FUEL RETURN PIPE SUB-ASSEMBLY
Install a new gasket and connect the fuel return pipe sub-assembly with the union bolt.
20 N*m (200 kgf*cm, 15 ft.*lbf)
Install the pipe clamp with the nut.
Tighten the nut until the clamp edges make contact with the engine side clamp edges.
4.INSTALL NO. 4 FUEL PIPE SUB-ASSEMBLY
Install 4 new gaskets and the No. 4 fuel pipe with the 2 union bolts.
25 N*m (255 kgf*cm, 18 ft.*lbf)
20 N*m (200 kgf*cm, 15 ft.*lbf)
53712C
5.INSTALL FRONT FENDER APRON LH