Home › Engine / Hybrid System › N04C-VQ (COOLING) › WATER PUMP › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073147 N04C-VQ COOLING _0355929 WATER PUMP A

N04C-VQ COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL ENGINE WATER PUMP ASSEMBLY

a.
A147499E07
2.167,0.167 2,0.167 2,0.167 1.885,0.313 false 2.229,0.094 3.229,0.292 1,0.198 10 false 2.2 to 2.7 mm

Apply a continuous bead of seal packing (diameter 2.2 to 2.7 mm (0.0866 to 0.1063 in.)) as shown in the illustration.

Seal packing:

Toyota Genuine Seal Packing Black, Three Bond 1207B or equivalent


NOTICE:
·

Remove any oil from the contact surface.

·

Install the engine water pump assembly within 3 minutes of applying the seal packing.

·

Do not start the engine for at least 2 hours after the installation.




b.

Install the engine water pump assembly with the 8 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 16701 2.INSTALL FAN SHROUD SUB-ASSEMBLY