Home › Engine / Hybrid System › 1HZ FUEL › INJECTION NOZZLES
RM2850E _51 Engine / Hybrid System _073151 1HZ FUEL _0355951 INJECTION NOZZLES A

1HZ FUEL  INJECTION NOZZLES  INJECTION NOZZLES ASSEMBLY  


PROCEDURE

Hide 1. ASSEMBLE INJECTION NOZZLE HOLDERS

a.
A422784

Assemble the nozzle holder retaining nut, the nozzle assembly, distance piece, pressure pin, pressure spring, adjusting shim and nozzle holder body, and finger tighten the retaining nut.


b.

Using SST, tighten the retaining nut.

SST
09268-64010  

Torque:

375 kg*cm (27 ft*lb, 37 N*m)


NOTICE:

Over torquing could cause nozzle deformation and needle adhesion or other defects.



Hide 2.INSTALL PERFORM PRESSURE AND SPRAY PATTERN TEST