Home › Engine / Hybrid System › 1HZ COOLING › THERMOSTAT
RM2850E _51 Engine / Hybrid System _073153 1HZ COOLING _0355961 THERMOSTAT A

1HZ COOLING  THERMOSTAT  THERMOSTAT INSTALLATION  


PROCEDURE

Hide 16331A 1.PLACE THERMOSTAT IN CYLINDER BLOCK

a.

Install a new gasket to the thermostat.


b.
A422307

Install the thermostat with the jiggle valve upward.


Hide 16321 2.INSTALL WATER INLET TO CYLINDER BLOCK

a.
A422308

Install the water inlet with the three bolts.

Torque:

200 kg*cm (14 ft*lb, 20 N*m)


NOTICE:

Torque the two upper bolts first.



Hide 3. FILL WITH ENGINE COOLANT

Hide 4.START ENGINE AND CHECK FOR LEAKS