Home › Engine / Hybrid System › 1HZ (LUBRICATION) › OIL COOLER, RELIEF VALVE AND CHECK VALVE
RM2850E _51 Engine / Hybrid System _073154 1HZ LUBRICATION _0355967 OIL COOLER, RELIEF VALVE AND CHECK VALVE A

1HZ LUBRICATION  OIL COOLER, RELIEF VALVE AND CHECK VALVE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL ENGINE DRAIN COCK

a.
A423083

Apply adhesive to two or three threads of the drain cock.

Adhesive:

Part No. 08833-00070, THREE BOND 1324 or equivalent



b.
A423084

Install and torque the drain cock as shown.

Torque:

200 kg*cm (14 ft*lb, 20 N*m)



Hide 15605A 2.INSTALL CHECK VALVE

a.
A423085

Install the check valve with a new gasket.

Torque:

275 kg*cm (20 ft*lb, 27 N*m)



Hide 15690 3.INSTALL RELIEF VALVE

a.
A423086

Install the relief valve with a new gasket.

Torque:

400 kg*cm (29 ft*lb, 39 N*m)



Hide 4.ASSEMBLE OIL COOLER AND OIL COOLER COVER

a.
A423087

Install two new gaskets and the oil cooler to the oil cooler cover with the four nuts.

Torque:

200 kg*cm (14 ft*lb, 20 N*m)



Hide 5.INSTALL OIL COOLER AND OIL COOLER COVER ASSEMBLY

a.
A423088

Install a new gasket, the oil cooler and oil cooler cover assembly with the thirteen bolts and two nuts.

Torque:

200 kg*cm (14 ft*lb, 20 N*m)



Hide 6.INSTALL OIL DIPSTICK GUIDE AND DIPSTICK

a.

Install a new O-ring to the oil dipstick guide.


b.

Apply engine oil to the new O-ring.


c.

Install the oil dipstick and guide with the two bolts.

Torque:

Intake manifold side

200 kg*cm (14 ft*lb, 20 N*m)

Oil cooler cover side

200 kg*cm (14 ft*lb, 20 N*m)



Hide 22100 7.INSTALL INJECTION PUMP

Hide 9.FILL WITH ENGINE COOLANT

Hide 10.START ENGINE AND CHECK FOR LEAKS