16400B
1.INSTALL RADIATOR DRAIN COCK PLUG
Install the radiator drain cock plug to the radiator assembly.
2.0 N*m (20 kgf*cm, 18 in.*lbf)
Replace the O-ring if it is damaged.
16520
2.INSTALL WATER FILLER ASSEMBLY
Install the water filler assembly with the hose clamp.
| *a | View A |
| *b | Upper Side |
| *c | LH Side |
Perform the installation with the hose clamp at the correct angle.
16571
3.INSTALL INLET RADIATOR HOSE
Install the inlet radiator hose with the hose clamp.
| *a | View A |
| *b | Upper Side |
Perform the installation with the hose clamp at the correct angle.
17940D
4.INSTALL INTERCOOLER ASSEMBLY
16400
5.INSTALL RADIATOR ASSEMBLY
Install the radiator assembly with intercooler assembly to the vehicle.
| *1 | No. 1 Radiator Bracket |
| *2 | No. 2 Radiator Bracket |
| *3 | No. 3 Radiator Bracket |
|
Bolt A |
|
Bolt B |
|
Nut |
Install the No. 2 radiator bracket with the 2 bolts.
20 N*m (204 kgf*cm, 15 ft.*lbf)
Install the No. 1 radiator bracket with the 2 bolts and nut.
18 N*m (184 kgf*cm, 13 ft.*lbf)
20 N*m (204 kgf*cm, 15 ft.*lbf)
Install the No. 3 radiator bracket with the 3 bolts.
18 N*m (184 kgf*cm, 13 ft.*lbf)
12 N*m (122 kgf*cm, 9 ft.*lbf)
Engage the 3 hose clamps.
Connect the vacuum transmitting hose.
53167
6.INSTALL RADIATOR BRACE ROD RH
Install the radiator brace rod RH with the bolt and nut.
18 N*m (184 kgf*cm, 13 ft.*lbf)
20 N*m (204 kgf*cm, 15 ft.*lbf)
53168
7.INSTALL RADIATOR BRACE ROD LH
Install the radiator brace rod LH with the bolt and nut.
18 N*m (184 kgf*cm, 13 ft.*lbf)
20 N*m (204 kgf*cm, 15 ft.*lbf)
16520
8.INSTALL WATER FILLER ASSEMBLY
Install the water filler assembly with the 2 bolts.
7.5 N*m (76 kgf*cm, 66 in.*lbf)
Connect the radiator reserve tank hose and water by-pass hose with the clamp and clip.
| *a | View A |
| *b | View B |
| *c | Upper Side |
| *d | Rear Side |
| *e | Front Side |
Perform the installation with the hose clamp at the correct angle.
16571
9.CONNECT INLET RADIATOR HOSE
Connect the inlet radiator hose with the hose clamp.
| *a | View A |
| *b | Upper Side |
| *c | RH Side |
Perform the installation with the hose clamp at the correct angle.
16206
10.INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY
17342F
11.CONNECT NO. 2 INTERCOOLER AIR HOSE
Connect the No. 2 intercooler air hose with the hose clamp.
| *a | View A |
| *b | Upper Side |
| *c | LH Side |
Perform the installation with the hose clamp at the correct angle.
6.5 N*m (66 kgf*cm, 58 in.*lbf)
17341K
12.CONNECT INTERCOOLER AIR HOSE
Connect the intercooler air hose with the hose clamp.
| *a | View A |
| *b | Upper Side |
| *c | RH Side |
Perform the installation with the hose clamp at the correct angle.
6.5 N*m (66 kgf*cm, 58 in.*lbf)
16701
13.INSTALL FAN SHROUD SUB-ASSEMBLY