Home › Engine / Hybrid System › N04C-VL (LUBRICATION) › OIL PRESSURE SWITCH › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073165 N04C-VL LUBRICATION _0356028 OIL PRESSURE SWITCH G

N04C-VL LUBRICATION  OIL PRESSURE SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 83530 1.INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Remove the front fender apron RH.

(Click hereEngine / Hybrid System>N04C-VL (INTAKE)>TURBOCHARGER>REMOVAL)


b.
A342137

Disconnect the engine oil pressure switch assembly connector.


c.

Using an ohmmeter, measure the resistance between the engine oil pressure switch assembly terminal and body ground.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Switch body Idling 10 kΩ or higher
Engine stopped Below 1 Ω


HINT:

If the value is not as specified, replace the engine oil pressure switch assembly.