Home › Engine / Hybrid System › N04C-VL (LUBRICATION) › OIL PUMP
RM2850E _51 Engine / Hybrid System _073165 N04C-VL LUBRICATION _0356030 OIL PUMP A

N04C-VL LUBRICATION  OIL PUMP  INSTALLATION  


PROCEDURE

Hide 15100 1.INSTALL OIL PUMP ASSEMBLY

a.
A147519E03
0.195,1.06 0.382,1.216 0.187,0.156 10 *a 0.833,1.147 0.425,1.147 false

Apply engine oil to the pump case of the cylinder block and the bearing.

Text in Illustration
*a Apply Engine Oil

NOTICE:

Failure to apply engine oil to the pump will result in poor lubrication, resulting in burning or abnormal wear.



b.

Install a new gasket.


c.

Install the oil pump assembly with the 7 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 13508M 2.INSTALL NO. 1 IDLE GEAR SUB-ASSEMBLY

a.

Install the idle gear and No. 1 idle gear thrust plate to the No. 1 idle gear shaft.


b.
A252297N04
1.969,0.792 2.583,0.792 true 0.635,0.76 1.156,0.76 true 1.24,2.281 1.438,1.375 1.438,1.375 1.573,1.375 true 1.438,1.375 1.313,2.323 true 1.458,2.344 2.167,2.344 true 1.438,2.448 1.979,2.448 1.979,2.448 1.979,2.354 true 2.01,3.698 2.25,3.302 2.25,3.302 2.396,3.302 true 2.26,3.313 2.115,3.729 true 2,3.865 1.417,4.427 1.417,4.427 1.271,4.427 true 0.417,0.667 0.688,0.844 0.271,0.177 10 false *1 2.635,0.688 2.865,0.875 0.229,0.188 10 false *2 1.615,1.271 1.865,1.438 0.25,0.167 10 false *a 2.188,2.281 2.417,2.469 0.229,0.188 10 true *a 2.438,3.188 2.656,3.385 0.219,0.198 10 true *a 1.073,4.323 1.323,4.521 0.25,0.198 10 false *a

With the oil hole of the No. 1 idle gear sub-assembly facing down, align the alignment marks of each gear and insert the No. 1 idle gear sub-assembly into the cylinder block.

Text in Illustration
*1 No. 1 Idle Gear Shaft
*2 Oil Hole
*a Alignment Mark

NOTICE:

Face the oil hole downward to avoid burning and abnormal wear.



c.

Install the No. 1 idle gear sub-assembly with the bolt.

Torque:

137 N*m (1397 kgf*cm, 101 ft.*lbf)