Home › Engine / Hybrid System › 14B (FUEL) › FUEL INJECTION NOZZLE › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073168 14B FUEL _0356040 FUEL INJECTION NOZZLE A

14B FUEL  FUEL INJECTION NOZZLE  INJECTION NOZZLES ASSEMBLY  


PROCEDURE

Hide 1. ASSEMBLE INJECTION NOZZLES

a.
A424207

Assemble the nozzle holder body, adjusting shim. pressure spring, pressure pin, distance piece, the nozzle assembly and nozzle holder retaining nut, and finger tighten the nut.

HINT:

Align the holes of the nozzle body, distance piece and nozzle holder body.



b.
A424208

Using a 14 mm deep socket wrench, torque the retaining nut.

Torque:

29 N*m (300 kgf*cm, 22 ft.*lbf)



Hide 2.PERFORM PRESSURE AND SPRAY PATTERN TEST