Home › Engine / Hybrid System › 14B (COOLING) › WATER PUMP › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073169 14B COOLING _0356046 WATER PUMP A

14B COOLING  WATER PUMP  WATER PUMP INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL WATER PUMP

a.
A424228

Connect the water bypass hose (1) to the water pump.


b.

Install a new gasket and the water pump with the 5 bolts.

Torque:

25 N*m (255 kgf*cm, 18 ft.*lbf)



c.

w/ ACSD:

Connect the water bypass hose (2) to the union on the water pump.


Hide 16577C 2.INSTALL RADIATOR PIPE

a.

Connect the radiator hose to the water pump.


b.
A424229

Install the radiator pipe with 2 bolts.

Torque:

21 N*m (214 kgf*cm, 15 ft.*lbf)



Hide 3.INSTALL WATER PUMP PULLEY, FLUID COUPLING, FAN AND DRIVE BELT(S) (w/ Fluid Coupling)

a.

Install the fan to the fluid coupling with 4 new nuts.

Torque:

6.5 N*m (66 kgf*cm, 57 in.*lbf)



b.

Temporarily install the pump pulley, the fluid fan and coupling assembly with the 4 nuts.


c.

Install and adjust the drive belt(s) with the alternator adjusting bolt and pivot bolt.

Drive belt deflection:

Click hereEngine / Hybrid System>14B (CHARGING)>CHARGING SYSTEM>ON-VEHICLE INSPECTION

Torque:
Adjusting bolt:

18.5 N*m (189 kgf*cm, 14 ft.*lbf)

Pivot bolt:

37.5 N*m (382 kgf*cm, 28 ft.*lbf)



d.

Tighten the 4 water pump pulley nuts.

Torque:

18.5 N*m (189 kgf*cm, 14 ft.*lbf)



Hide 4.INSTALL WATER PUMP PULLEY, FAN SPACER, FAN AND DRIVE BELT (w/o Fluid Coupling)

a.

Install the pump pulley, fan spacer and fan with the 4 bolts.

Torque:

18.5 N*m (189 kgf*cm, 14 ft.*lbf)



b.

Install and adjust the drive belt with the alternator adjusting bolt and pivot bolt.

Drive belt deflection:

Click hereEngine / Hybrid System>14B (CHARGING)>CHARGING SYSTEM>ON-VEHICLE INSPECTION

Torque:
Adjusting bolt:

18.5 N*m (189 kgf*cm, 14 ft.*lbf)

Pivot bolt:

37.5 N*m (382 kgf*cm, 28 ft.*lbf)



Hide 5. FILL WITH ENGINE COOLANT

Hide 6. START ENGINE, AND CHECK FOR COOLANT LEAKS