Home › Engine / Hybrid System › N04C-UH (COOLING) › WATER PUMP
RM2850E _51 Engine / Hybrid System _073178 N04C-UH COOLING _0356098 WATER PUMP A

N04C-UH COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL ENGINE WATER PUMP ASSEMBLY

a.
A147499E08
2.284,0.047 3.174,0.224 0.891,0.177 10 1.5 to 2.5 mm 1.88,0.32 2.07,0.131 2.07,0.131 2.234,0.131 false

Apply a continuous bead of seal packing (diameter 1.5 to 2.5 mm (0.06 to 0.10 in.)) as shown in the illustration.

Seal packing:

Toyota Genuine Seal Packing Black, Three Bond 1207B or equivalent


NOTICE:
·

Remove any oil from the contact surface.

·

Install the engine water pump assembly within 3 minutes of applying the seal packing.

·

Do not start the engine for at least 2 hours after the installation.




b.

Install the engine water pump assembly with the 8 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 16701 2.INSTALL FAN SHROUD SUB-ASSEMBLY