Home › Engine / Hybrid System › N04C-UH (LUBRICATION) › ENGINE OIL COOLER › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073179 N04C-UH LUBRICATION _0356107 ENGINE OIL COOLER A

N04C-UH LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710C 1.INSTALL OIL COOLER GASKET

a.

Install a new oil cooler gasket.


Hide 15710 2.INSTALL OIL COOLER ASSEMBLY

a.
A347113E02
1.188,0.792 1.5,0.99 0.313,0.198 10 false *a

Install 4 new O-rings as shown in the illustration.

Text in Illustration
*a Oil Cooler Assembly Side


b.

Install the oil cooler assembly with 2 new gaskets to the oil cooler cover sub-assembly with the 8 washers and 4 nuts.

Torque:

12 N*m (125 kgf*cm, 9 ft.*lbf)



c.

Install the oil cooler assembly with oil cooler cover sub-assembly with the 15 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



d.

Install the wire harness bracket with the 2 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 83530 3.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

Hide 17201 5.INSTALL TURBOCHARGER SUB-ASSEMBLY