28100
1.INSTALL STARTER ASSEMBLY
Install the starter assembly with the bolt and nut.
71 N*m (724 kgf*cm, 52 ft.*lbf)
for Manual Transmission:
Install the wire harness clamp bracket with the bolt.
18 N*m (178 kgf*cm, 13 ft.*lbf)
Connect the 2 wire harness clamps.
for Automatic Transmission:
Connect the 2 wire harness clamps.
Connect the terminal 50 connector to the starter assembly.
Connect the wire harness to terminal 30 with the nut, and install the terminal cap.
21 N*m (214 kgf*cm, 15 ft.*lbf)
32907C
2.INSTALL OIL COOLER TUBE SUB-ASSEMBLY
Install the oil cooler tube sub-assembly with the 4 bolts and bracket.
53712C
3.INSTALL FRONT FENDER APRON LH
51441D
4.INSTALL NO. 1 ENGINE UNDER COVER (for Plastic Type)
51441D
5.INSTALL NO. 1 ENGINE UNDER COVER (for Metal Type)
6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL