Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL CARRIER ASSEMBLY
RM2850E _52 Drivetrain _073182 AXLE AND DIFFERENTIAL _0356119 DIFFERENTIAL CARRIER ASSEMBLY A

AXLE AND DIFFERENTIAL  DIFFERENTIAL CARRIER ASSEMBLY  REMOVAL  


PROCEDURE

Hide 1.DRAIN DIFFERENTIAL OIL

a.
C162158E03
2.71,0.627 2.925,0.779 0.215,0.153 10 *1 2.495,2.738 2.704,2.891 0.208,0.153 10 *2 2.015,1.802 2.573,0.704 2.573,0.704 2.671,0.704 false 2.144,2.458 2.379,2.814 2.379,2.814 2.465,2.814 false

Remove the filler plug and gasket.

Text in Illustration
*1 Filler Plug
*2 Drain Plug


b.

Remove the drain plug and gasket, and drain the oil.


c.

Install the drain plug with a new gasket.

Torque:

50 N*m (510 kgf*cm, 37 ft.*lbf)



Hide 42312 2.REMOVE REAR AXLE SHAFT

Hide 37100 3.SEPARATE PROPELLER SHAFT ASSEMBLY

Hide 41101 4.REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

a.
C157232

Using a jack, support the rear differential carrier assembly.

NOTICE:

As it is heavy, support the differential securely with a jack.



b.

Remove the 8 bolts, 4 nuts, 4 washers and the rear differential carrier assembly.

NOTICE:

Be careful not to damage the installation surface.



Hide 42181 5.REMOVE REAR DIFFERENTIAL CARRIER GASKET

a.

Remove the rear differential carrier gasket.