84535A
1.INSTALL DOOR LOCK SWITCH
w/ Handle:
Attach the 2 pins to install the door lock switch.
Install the door lock base plate with the screw.
20 N*m (200 kgf*cm, 14 ft.*lbf)
w/o Handle:
Attach the 2 pins to install the door lock switch.
Install the door lock base plate with the screw.
20 N*m (200 kgf*cm, 14 ft.*lbf)
2.APPLY BODY GREASE
Apply MP grease to the sliding parts of the back door lock assembly.
69350
3.INSTALL BACK DOOR LOCK ASSEMBLY (w/ Handle)
Using a T30 "TORX" socket wrench, install the back door lock assembly with the 3 "TORX" screws.
5.0 N*m (51 kgf*cm, 44 in.*lbf)
Connect the connector.
69350
4.INSTALL BACK DOOR LOCK ASSEMBLY (w/o Handle)
Using a T30 "TORX" socket wrench, install the back door lock assembly with the 3 "TORX" screws.
5.0 N*m (51 kgf*cm, 44 in.*lbf)
Install the No. 2 door lock control rod snap.
Attach the snap and install the back door lock remote control open link to the back door lock control link silencer.
Attach the snap and install the back door lock locking link to the back door lock control link silencer.
Connect the 2 connectors and clamp.
| *a | Courtesy Switch Connector |
| *b | Power Door Lock Connector |
67848
5.INSTALL BACK DOOR SERVICE HOLE COVER LH
67853C
6.INSTALL NO. 3 BACK DOOR SERVICE HOLE COVER (w/o Handle)
69291
7.INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY (w/o Handle)
64790C
8.INSTALL BACK DOOR TRIM PANEL ASSEMBLY LH (w/ Handle)
64790C
9.INSTALL BACK DOOR TRIM PANEL ASSEMBLY LH (w/o Handle)
69278D
10.INSTALL DOOR INSIDE HANDLE BEZEL LH (w/o Handle)
67199
11.INSTALL BACK DOOR HANDLE COVER (w/ Handle)
67807
12.INSTALL BACK DOOR SERVICE HOLE COVER SUB-ASSEMBLY (w/o Handle)
68931
13.INSTALL NO. 1 BACK DOOR STAY (w/ No. 1 Back Door Stay)
74611B
14.INSTALL ASSIST GRIP