Wear protective gloves. Sharp areas on the parts may injure your hands.
The procedure listed below is for 2nd row to 7th row for long body, and 2nd row to 6th row for standard body.
2nd row seats are not installed to vehicles with cooler boxes.
The procedure listed below is a representative example.
Use the same procedure for all rows, unless otherwise specified.
62525D
1.REMOVE NO. 1 SIDE TRIM BASE COVER LH
Use the same procedure described for the No. 1 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>REMOVAL
62526D
2.REMOVE NO. 2 SIDE TRIM BASE COVER LH
Use the same procedure described for the No. 2 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>REMOVAL
62526F
3.REMOVE NO. 3 SIDE TRIM BASE COVER LH (w/ No. 3 Side Trim Base Cover LH)
except Type B:
Use the same procedure described for the No. 2 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>REMOVAL
for Type B:
Use the same procedure described for the No. 4 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>REMOVAL
62526G
4.REMOVE NO. 4 SIDE TRIM BASE COVER LH (w/ No. 4 Side Trim Base Cover LH)
except Type B:
Use the same procedure described for the No. 2 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>REMOVAL
for Type B:
Use the same procedure described for the No. 5 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>REMOVAL
62672
5.REMOVE NO. 1 SIDE TRIM BOARD COVER LH
Use the same procedure described for the No. 1 side trim board cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>REMOVAL
6.REMOVE REAR NO. 1 SEAT ASSEMBLY LH
for 2nd Row Seat:
Remove the 4 bolts.
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Lift up the rear No. 1 seat assembly LH to detach the hook to remove it.
for 3rd Row Seat:
Remove the 4 bolts.
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Lift up the rear No. 1 seat assembly LH to detach the 2 hooks to remove it.
for Long Body 4th, 6th and 7th Row Seat:
for Standard Body 5th Row Seat:
Remove the 4 bolts.
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Lift up the rear No. 1 seat assembly LH to detach the 2 hooks to remove it.
for Long Body 5th Row Seat:
for Standard Body 4th Row Seat:
Remove the 4 bolts.
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Lift up the rear No. 1 seat assembly LH to detach the 2 hooks to remove it.
71308G
7.REMOVE REAR SEAT LEG SUB-ASSEMBLY RH (for 2nd Row Seat)
Remove the 2 bolts and rear seat leg sub-assembly RH.
79108A
8.REMOVE REAR NO. 6 SEAT LEG SUB-ASSEMBLY
for Long Body 5th Row Seat:
for Standard Body 4th Row Seat:
Remove the 2 bolts and rear No. 6 seat leg sub-assembly.
79108B
9.REMOVE REAR NO. 7 SEAT LEG SUB-ASSEMBLY (for Standard Body 5th Row Seat)
Remove the 2 bolts and rear No. 7 seat leg sub-assembly.