Wear protective gloves. Sharp areas on the parts may injure your hands.
The procedure listed below is for 2nd row to 7th row for long body, and 2nd row to 6th row for standard body.
2nd row seats are not installed to vehicles with cooler boxes.
The procedure listed below is a representative example.
Use the same procedure for all rows, unless otherwise specified.
79108B
1.INSTALL REAR NO. 7 SEAT LEG SUB-ASSEMBLY (for Standard Body 5th Row Seat)
Install the rear seat leg sub-assembly RH with the 2 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
79108A
2.INSTALL REAR NO. 6 SEAT LEG SUB-ASSEMBLY
for Long Body 5th Row Seat:
for Standard Body 4th Row Seat:
Install the rear No. 6 seat leg sub-assembly with the 2 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
71308G
3.INSTALL REAR SEAT LEG SUB-ASSEMBLY RH (for 2nd Row Seat)
Install the rear seat leg sub-assembly RH with the 2bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
4.INSTALL REAR NO. 1 SEAT ASSEMBLY LH
for Long Body 4th, 6th and 7th Row Seat:
for Standard Body 5th Row Seat:
2 or more persons are required for the following procedures in order to prevent damage of the vehicle interior.
Place the rear No. 1 seat assembly LH in the cabin.
Attach the 2 hooks.
Install the rear No. 1 seat assembly LH with the 4 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
for Long Body 5th Row Seat:
for Standard Body 4th Row Seat:
2 or more persons are required for the following procedures in order to prevent damage of the vehicle interior.
Place the rear No. 1 seat assembly LH in the cabin.
Attach the 2 hooks.
Install the rear No. 1 seat assembly LH with the 4 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
for 3rd Row Seat:
2 or more persons are required for the following procedures in order to prevent damage of the vehicle interior.
Place the rear No. 1 seat assembly LH in the cabin.
Attach the 2 hooks.
Install the rear No. 1 seat assembly LH with the 4 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
for 2nd Row Seat:
2 or more persons are required for the following procedures in order to prevent damage of the vehicle interior.
Place the rear No. 1 seat assembly LH in the cabin.
Attach the guide.
Install the rear No. 1 seat assembly LH with the 4 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
62672
5.INSTALL NO. 1 SIDE TRIM BOARD COVER LH
Use the same procedure described for the No. 1 side trim board cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
62526G
6.INSTALL NO. 4 SIDE TRIM BASE COVER LH (w/ No. 4 Side Trim Base Cover LH)
except Type B:
Use the same procedure described for the No. 2 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
for Type B:
Use the same procedure described for the No. 5 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
62526F
7.INSTALL NO. 3 SIDE TRIM BASE COVER LH (w/ No. 3 Side Trim Base Cover LH)
except Type B:
Use the same procedure described for the No. 2 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
for Type B:
Use the same procedure described for the No. 4 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
62526D
8.INSTALL NO. 2 SIDE TRIM BASE COVER LH
Use the same procedure described for the No. 2 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION
62525D
9.INSTALL NO. 1 SIDE TRIM BASE COVER LH
Use the same procedure described for the No. 1 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>INSTALLATION