Wear protective gloves. Sharp areas on the parts may injure your hands.
The procedure listed below is for 1st row to 7th row for long body, and 1st row to 6th row for standard body.
The procedure listed below is a representative example.
Use the same procedure for all rows, unless otherwise specified.
62515B
1.REMOVE NO. 1 SIDE TRIM BASE COVER RH
62627D
2.REMOVE SIDE TRIM COVER RH (for Type B)
62516B
3.REMOVE NO. 2 SIDE TRIM BASE COVER RH
62516D
4.REMOVE NO. 3 SIDE TRIM BASE COVER RH (w/ No. 3 Side Trim Base Cover RH)
Use the same procedure described for the No. 2 side trim base cover RH.
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>REMOVAL
62516E
5.REMOVE NO. 4 SIDE TRIM BASE COVER RH (w/ No. 4 Side Trim Base Cover RH)
62516F
6.REMOVE NO. 5 SIDE TRIM BASE COVER RH (w/ No. 5 Side Trim Base Cover RH)
62516G
7.REMOVE NO. 6 SIDE TRIM BASE COVER RH (for Long Body, w/ No. 6 Side Trim Base Cover RH)
Use the same procedure described for the No. 2 side trim base cover RH..
Click hereVehicle Interior>INTERIOR>SIDE PANEL (for RHD)>REMOVAL
62671F
8.REMOVE NO. 1 SIDE TRIM BOARD COVER RH
62227
9.REMOVE QUARTER PILLAR COVER RH
62228
10.REMOVE LOWER QUARTER PILLAR COVER LH
79959D
11.REMOVE SEAT LEG COVER (for 1st Row Seat with Step)
Using moulding remover A, detach the 2 clips to remove the seat leg cover.
12.REMOVE REAR NO. 1 SEAT ASSEMBLY RH (for 1-leg Type)
for 1st Row Seat:
Remove the 4 bolts.
| *A | w/ Step | *B | w/o Step |
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Lift up the rear No. 1 seat assembly RH to detach the 2 hooks to remove it.
except 1st Row Seat:
Remove the 4 bolts.
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Lift up the rear No. 1 seat assembly RH to detach the 2 hooks to remove it.
13.REMOVE REAR NO. 1 SEAT ASSEMBLY RH (for 2-leg Type)
for 1st Row Seat:
Remove the 7 bolts.
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Lift up the rear No. 1 seat assembly RH to detach the 2 hooks to remove it.
except 1st Row Seat:
Remove the 6 bolts.
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Lift up the rear No. 1 seat assembly RH to detach the 2 hooks to remove it.
for 5th Row Seat:
Remove the 6 bolts.
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Lift up the rear No. 1 seat assembly RH to detach the 2 hooks to remove it.
79605
14.REMOVE NO. 6 SEAT LEG SUB-ASSEMBLY RH (for Standard Body 1-leg Type 5th Row Seat without Sub Seat)
Remove the 2 bolts and No. 6 seat leg sub-assembly RH.
79107G
15.REMOVE REAR NO. 6 SEAT LEG SUB-ASSEMBLY (for 2-leg Type 5th Row Seat)
Remove the 2 bolts and rear No. 6 seat leg sub-assembly.
79097
16.REMOVE LUGGAGE COMPARTMENT WALL PARTITION SUB-ASSEMBLY (for 7th Row Seat with 4-Passenger Seat)
Remove the 5 screws.
Remove the 3 bolts and luggage compartment wall partition sub-assembly.
09113
17.REMOVE JACK HANDLE (for 7th Row Seat with 4-Passenger Seat)
Detach the 2 clamps to remove the jack handle.
18.REMOVE REAR NO. 8 SEAT ASSEMBLY RH (for 7th Row Seat with 4-Passenger Seat)
Use the same procedure for the RH and LH sides.
The procedure listed below is for the RH side.
Remove the 4 bolts.
2 or more persons are required for the following procedure in order to prevent damage of the vehicle interior.
Lift up the rear No. 8 seat assembly RH to detach the 2 hooks to remove it.