Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for RHD vehicles.
The procedure listed below is for 1st row to 7th row for long body, and 1st row to 6th row for standard body.
The procedure listed below is a representative example.
Use the same procedure for all rows, unless otherwise specified.
73306
1.INSTALL REAR SEAT OUTER BELT ASSEMBLY
Install the rear seat outer belt assembly with the bolt.
42 N*m (428 kgf*cm, 31 ft.*lbf)
| *a | Location |
The rear seat outer belt assembly must not overlap the location.
71812K
2.INSTALL RECLINING ADJUSTER COVER LH
3.INSTALL REAR NO. 1 SEAT ASSEMBLY LH