Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY(for 2-Passenger Seat with Separate Type Seatback)
RM2850E _58 Vehicle Interior _073190 SEAT BELT _0356182 REAR SEAT INNER BELT ASSEMBLY(for 2-Passenger Seat with Separate Type Seatback) A

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for 2-Passenger Seat with Separate Type Seatback)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

The procedure listed below is for 1st row to 7th row for long body, and 1st row to 6th row for standard body.

·

The procedure listed below is a representative example.

·

Use the same procedure for all rows, unless otherwise specified.



PROCEDURE

Hide 73380F 1.INSTALL REAR SEAT INNER BELT ASSEMBLY

HINT:

Use the same procedure as for the rear seat inner belt assembly.


a.

Pass the rear seat inner belt assembly through the hole of the rear seat cover and connect it.


b.
B457795E01
1.688,0.844 2.115,0.313 true 0.615,1.719 1.573,1.385 true 2.135,0.146 2.448,0.344 0.313,0.198 10 false *a 0.438,1.635 0.75,1.833 0.313,0.198 10 false *a

Install the rear seat inner belt assembly with the bolt.

Torque:

42 N*m (428 kgf*cm, 31 ft.*lbf)


Text in Illustration
*a Location

NOTICE:

The rear seat inner belt assembly must not overlap the location.



c.
B457757

Attach the fastening tape to close the rear seat cover.

Text in Illustration
V100145

Fastening Tape


Hide 2.INSTALL NO. 2 SEAT CUSHION COVER WITH PAD

a.

Set the No. 2 seat cushion cover sub-assembly RH with pad on the No. 1 seat leg sub-assembly RH.


b.
B473608

for 2-leg Type 5th Row Seat:

i.

Pass the strap of the No. 1 seat cushion cover sub-assembly RH through the No. 1 seat leg sub-assembly RH.



c.

Attach the 9 hooks to install the No. 2 seat cushion cover with pad to the No. 1 seat leg sub-assembly RH as shown in the illustration.

B457749E02
4.458,0.49 4.948,0.188 true 3.74,0.771 4.438,0.594 true 3.74,3.531 3.74,3.365 false 5.094,3.531 5.094,3.365 false 4.417,3.479 4.417,3.313 false 4.969,0.052 5.281,0.25 0.313,0.198 10 false *a 3.563,0.719 3.875,0.917 0.313,0.198 10 false *b 3.667,3.51 3.979,3.708 0.313,0.198 10 false *c 5.021,3.521 5.333,3.719 0.313,0.198 10 false *c 4.344,3.49 4.656,3.688 0.313,0.198 10 false *1

Text in Illustration
*1 No. 1 Seat Leg Sub-assembly RH - -
*a Frame Hole *b Pad Hole
*c Hook - -


d.
B457747

Attach the fastening tape and close the No. 2 seat cushion cover RH.

Text in Illustration
V100145

Fastening Tape


Hide 73360B 4.CONNECT REAR SEAT OUTER BELT ASSEMBLY

a.

Check that the rear seat outer belt assembly is not twisted.


b.
B457737

Attach the 2 guides.


c.

Connect the rear seat outer belt assembly with the bolt.

Torque:

42 N*m (428 kgf*cm, 31 ft.*lbf)



Hide 73350C 5.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

HINT:

Use the same procedure as for the rear seat outer belt assembly.


Hide 71148C 6.INSTALL REAR SEAT OUTER LEG COVER (for 2-leg Type)

Hide 71149R 7.INSTALL REAR SEAT INNER LEG COVER (for 2-leg Type)

Hide 79967J 8.INSTALL REAR NO. 4 SEAT LEG SIDE COVER (for 7th Row Seat with 4-Passenger Seat)

Hide 13.INSTALL SUB SEAT ASSEMBLY (w/ Sub Seat)