Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for RHD vehicles.
The procedure listed below is for 1st row to 7th row for long body, and 1st row to 6th row for standard body.
The procedure listed below is a representative example.
Use the same procedure for all rows, unless otherwise specified.
73580
1.INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY RH
Use the same procedure for the rear No. 2 seat inner belt assembly RH.
Install the rear No. 2 seat inner belt assembly RH with the bolt.
42 N*m (428 kgf*cm, 31 ft.*lbf)
| *a | Location |
The rear seat inner belt assembly must not overlap the location.
71812C
2.INSTALL RECLINING ADJUSTER COVER LH
71811C
3.INSTALL RECLINING ADJUSTER COVER RH
4.INSTALL SUB SEAT ASSEMBLY (w/ Sub Seat)
5.INSTALL REAR NO. 1 SEAT ASSEMBLY RH