Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for RHD vehicles.
The procedure listed below is for 1st row to 7th row for long body, and 1st row to 6th row for standard body.
The procedure listed below is a representative example.
Use the same procedure for all rows, unless otherwise specified.
1.REMOVE REAR NO. 1 SEAT ASSEMBLY RH
2.REMOVE SUB SEAT ASSEMBLY (w/ Sub Seat)
71811C
3.REMOVE RECLINING ADJUSTER COVER RH
71812C
4.REMOVE RECLINING ADJUSTER COVER LH
73580
5.REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY RH
Use the same procedure for the rear No. 2 seat inner belt assembly RH.
Remove the bolt and rear No. 2 seat inner belt assembly RH.