Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for RHD vehicles.
The procedure listed below is for 1st row to 7th row for long body, and 1st row to 6th row for standard body.
The procedure listed below is a representative example.
Use the same procedure for all rows, unless otherwise specified.
1.REMOVE SUB SEAT ASSEMBLY (w/ Sub Seat)
71811C
2.REMOVE RECLINING ADJUSTER COVER RH
Remove the 2 screws.
Detach the guide and remove the reclining adjuster cover RH.
71812C
3.REMOVE RECLINING ADJUSTER COVER LH
Remove the 2 screws.
Detach the guide and remove the reclining adjuster cover LH.
73580
4.REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY RH (w/ Seat Belt)
71148N
5.REMOVE REAR SEAT OUTER LEG COVER
Remove the 3 screws.
Using a clip remover with its tip wrapped with protective tape, detach the 4 clips.
|
Protective Tape |
Using moulding remover A, detach the detach the 9 claws and 2 guides and remove the rear seat outer leg cover.
for LHD:
for 1st Row Seat Type A:
Remove the 4 screws.
Using a clip remover with its tip wrapped with protective tape, detach the 4 clips.
|
Protective Tape |
Using moulding remover A, detach the 10 claws and remove the rear seat outer leg cover.
for 1st Row Seat Type B:
Remove the 4 screws.
Using a clip remover with its tip wrapped with protective tape, detach the 4 clips.
|
Protective Tape |
Using moulding remover A, detach the detach the 9 claws and 2 guides and remove the rear seat outer leg cover.
71149K
6.REMOVE REAR SEAT INNER LEG COVER
Remove the screw.
Detach the 2 claws and 2 guides and remove the rear seat inner leg cover.
for LHD:
for 1st Row Seat Type A:
Remove the screw.
Detach the claw and 2 guides and remove the rear seat inner leg cover.
for Seat Layout with Luggage Compartment 6th Row Seat:
Remove the screw.
Detach the 2 claws and 2 guides and remove the rear seat inner leg cover.
74617C
7.REMOVE ASSIST GRIP PLUG (w/ Assist Grip)
Use the same procedure for the other assist grip plugs.
except Middle-back Seat Type B:
Using a thin-bladed screwdriver with its tip wrapped with protective tape, detach the 2 claws and remove the assist grip plug.
|
Protective Tape |
74610A
8.REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Assist Grip)
Use the same procedure for the other assist grip sub-assemblies.
except Middle-back Seat Type B:
Remove the 2 screws and assist grip sub-assembly.
for Middle-back Seat Type B:
Using a thin-bladed screwdriver with its tip wrapped with protective tape, detach the 6 claws and open the 2 covers.
Remove the 2 screws and assist grip sub-assembly.
74130C
9.REMOVE REAR ASH RECEPTACLE ASSEMBLY (w/ Ashtray)
Remove the ash receptacle assembly.
74145A
10.REMOVE REAR ASH RECEPTACLE PLATE (w/ Ashtray)
Remove the 2 screws and rear ash receptacle plate.
79013
11.REMOVE NO. 1 SEATBACK COVER SUB-ASSEMBLY RH
Remove the 7 hog rings.
for Low-back Seat Type:
Remove the 4 hog rings and No. 1 seatback cover sub-assembly RH.
for Middle-back Seat Type A:
Remove the 8 hog rings and No. 1 seatback cover sub-assembly RH.
for Middle-back Seat Type B:
Remove the 8 hog rings and No. 1 seatback cover sub-assembly RH.
79017A
12.REMOVE NO. 1 SEATBACK PAD SUB-ASSEMBLY RH
Remove the No. 1 seatback pad sub-assembly RH.
| *A | for Low-back Seat Type | *B | for Middle-back Seat Type A |
| *C | for Middle-back Seat Type B | - | - |
79021
13.REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH
except Middle-back Seat Type B:
Detach the fastening tape and fold back the No. 2 seat cushion cover RH.
|
Fastening Tape |
Detach the 9 hooks.
w/ Seat Belt:
Pass the rear seat lap type belt assembly through the hole in the No. 2 seat cushion cover sub-assembly RH.
Remove the No. 2 seat cushion cover sub-assembly RH with pad from the No. 1 seat leg sub-assembly RH.
Detach the 3 pieces of fastening tape.
|
Fastening Tape |
Remove the 12 hog rings and No. 2 seat cushion cover sub-assembly RH from the No. 2 seat cushion pad RH.
for Middle-back Seat Type B:
Remove the 12 hog rings and No. 2 seat cushion cover sub-assembly RH with pad from the No. 3 seat cushion spring assembly.
Remove the 12 hog rings and No. 2 seat cushion cover sub-assembly RH from the No. 2 seat cushion pad sub-assembly RH.
73330G
14.REMOVE REAR SEAT LAP TYPE BELT ASSEMBLY (w/ Seat Belt)
72345A
15.REMOVE RECLINING CONNECTING PIPE (except Middle-back Seat Type B)
Remove the reclining connecting pipe.
79405A
16.REMOVE NO. 4 SEAT LEG SUB-ASSEMBLY RH (for Middle-back Seat Type B)
Remove the 2 bolts and No. 4 seat leg sub-assembly RH.
79180A
17.REMOVE NO. 1 SEATBACK SPRING ASSEMBLY RH
except Middle-back Seat Type B:
w/o Seat Belt:
Remove the 4 bolts.
Detach the 2 guides and remove the No. 1 seatback spring assembly RH.
w/ Seat Belt:
Remove the 2 bolts.
Detach the 2 guides and remove the No. 1 seatback spring assembly RH.
for Middle-back Seat Type B:
Remove the 4 bolts and remove the No. 1 seatback spring assembly RH.