Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY(for 2-Passenger Seat with Bench Type Seatback)
RM2850E _58 Vehicle Interior _073190 SEAT BELT _0356185 REAR SEAT OUTER BELT ASSEMBLY(for 2-Passenger Seat with Bench Type Seatback) A

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY(for 2-Passenger Seat with Bench Type Seatback)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedures listed below are for RHD vehicles.

·

The procedure listed below is for 1st row to 7th row for long body, and 1st row to 6th row for standard body.

·

The procedure listed below is a representative example.

·

Use the same procedure for all rows, unless otherwise specified.



PROCEDURE

Hide 2.REMOVE SUB SEAT ASSEMBLY (w/ Sub Seat)

Hide 7.REMOVE NO. 2 SEAT CUSHION COVER WITH PAD

a.
B472840

Detach the fastening tape and fold back the No. 2 seat cushion cover sub-assembly RH.

Text in Illustration
V100145

Fastening Tape


b.

Detach the 9 hooks.

B472842


c.
B472847

Pass the rear seat lap type belt assembly through the hole in the No. 2 seat cushion cover sub-assembly RH.


d.

Remove the No. 2 seat cushion cover with pad from the No. 1 seat leg sub-assembly RH.


Hide 73330G 8.REMOVE REAR SEAT LAP TYPE BELT ASSEMBLY

a.
B472852

Loosen the bolt and remove the rear seat lap type belt assembly.