1.INSTALL FRONT DOOR WINDOW GLASS ASSEMBLY RH
Remove the butyl tape from the front door window assembly RH (When reusing the front door window assembly RH).
Remove the butyl tape from the door panel.
Remove the butyl tape from the door panel.
| *1 | Butyl Tape |
| *a | Back Side |
| *b | Overlap the butyl tape by 20 mm (0.787 in.) or more. |
Install the suction cups to the front door window glass assembly RH.
Install the front door window glass assembly RH to the door panel.
The front door window glass assembly RH may fall while performing this procedure. Therefore, use suction cups to hold the front door window glass assembly RH from the outside of the vehicle.
Install the No. 1 side window clip.
62778A
2.INSTALL FRONT SIDE WINDOW SASH CAP
Install the front side window sash cap.
74811B
3.INSTALL DOOR PULL HANDLE
67601
4.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH
81230
5.INSTALL COURTESY LIGHT ASSEMBLY (w/ Courtesy Light)
69277B
6.INSTALL FRONT DOOR INSIDE HANDLE BEZEL RH