Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for RHD vehicles.
86212
1.INSTALL NO. 2 RADIO BRACKET
Install the No. 2 radio bracket with the 3 screws.
86211
2.INSTALL NO. 1 RADIO BRACKET
Install the No. 1 radio bracket with the 3 screws.
86120
3.INSTALL RADIO RECEIVER ASSEMBLY
Connect the connectors.
Insert the radio receiver assembly with bracket.
When inserting the radio receiver assembly, do not press the knobs on it.
Install the radio receiver assembly with the 4 bolts.
55410C
4.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION