Home › Vehicle Interior › INTERIOR PANEL › INSTRUMENT PANEL SAFETY PAD › 2017.01–2019.08
RM2850E _58 Vehicle Interior _073212 INTERIOR PANEL _0356808 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANEL  INSTRUMENT PANEL SAFETY PAD  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for RHD vehicles.



PROCEDURE

Hide 55301 1.INSTALL INSTRUMENT PANEL SUB-ASSEMBLY

a.

Install the 2 nuts <A>, 2 bolts <B> and 8 bolts <C> and instrument panel sub-assembly.


b.

Install the 2 clips <H>.

B465905E01
3.74,0.302 4.063,0.469 0.323,0.167 10 true <H> 6.583,0.167 6.906,0.354 0.323,0.188 10 true <H> 5.792,0.719 6.104,0.885 0.313,0.167 10 true <A> 3.01,3.115 3.302,3.292 0.292,0.177 10 true <A> 6.667,2.844 7.01,3.01 0.344,0.167 10 true <B> 5.635,2.958 6,3.146 0.365,0.188 10 true <B> 4.813,3.167 5.156,3.344 0.344,0.177 10 true <C> 3.438,3.417 3.781,3.583 0.344,0.167 10 true <C> 2.771,3.292 3.094,3.458 0.323,0.167 10 true <C> 2.531,3.49 2.844,3.656 0.313,0.167 10 true <C> 1.958,3.563 2.292,3.74 0.333,0.177 10 true <C> 1.646,3.406 1.958,3.573 0.313,0.167 10 true <C> 1.115,3.531 1.417,3.698 0.302,0.167 10 true <C> 0.823,3.219 1.135,3.385 0.313,0.167 10 true <C>


c.
B465904

Connect the 5 connectors.


d.

w/ Outer Mirror Switch:

Attach the clamp.


e.

w/ Antenna:

Connect the connector and attach the clamp.


f.

Connect the connector and attach the 4 clamps.

B465903E01
0.24,1.542 0.5,1.75 0.26,0.208 12 true *A 5.24,0.24 5.5,0.448 0.26,0.208 12 true *B

Text in illustration
*A w/ Outer Mirror Switch *B w/ Antenna


g.

w/o Passenger Side Airbag:

Install the 2 bolts <G>.

Torque:

20 N*m (204 kgf*cm, 15 ft.*lbf)



Hide 45286B 2.INSTALL UPPER STEERING COLUMN COVER

Hide 45287 3.INSTALL LOWER STEERING COLUMN COVER

Hide 45100 4.INSTALL STEERING WHEEL ASSEMBLY

Hide 45130 5.INSTALL HORN BUTTON ASSEMBLY

Hide 55962A 6.INSTALL SIDE DEFROSTER NOZZLE LH (w/ Heater)

a.

Attach the 4 claws to install the side defroster nozzle LH.


Hide 55969 7.INSTALL NO. 2 DEFROSTER NOZZLE OPENING COVER (w/o Heater)

a.

Attach the 4 claws to install the No. 2 defroster nozzle opening cover.


Hide 73970A 8.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (w/ Passenger Side Airbag)

Hide 55523 9.INSTALL HEATER CONTROL OPENING COVER (w/o Air Control Panel)

a.

Install the heater control opening cover with the 4 bolts <C>.


Hide 55900 10.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (w/ Air Control Panel)

Hide 55522B 11.INSTALL RADIO TUNER OPENING COVER (w/o Audio)

a.

Install the radio tuner opening cover with the 4 bolts.


Hide 86120 12.INSTALL RADIO RECEIVER ASSEMBLY (w/ Audio)

Hide 83100 13.INSTALL COMBINATION METER ASSEMBLY

Hide 55410C 14.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

a.

Connect the connector.


b.

Attach the first claw.


c.

Attach the 24 claws to install the instrument cluster finish panel assembly.

B465900E01
0.542,2.031 0.854,2.229 0.313,0.198 10 false *a

Text in illustration
*a First Claw - -


Hide 55432C 15.INSTALL RESERVOIR TANK DOOR

a.

Attach the 4 clips to install the reservoir tank door.


Hide 55961A 16.INSTALL SIDE DEFROSTER NOZZLE RH (w/ Heater)

a.

Attach the 3 claws to install the side defroster nozzle RH.


Hide 55959A 17.INSTALL NO. 1 DEFROSTER NOZZLE OPENING COVER (w/o Heater)

a.

Attach the 3 claws to install the No. 1 defroster nozzle opening cover.


Hide 55458B 18.INSTALL LOWER INSTRUMENT COVER

a.

Attach the 3 claws to install the lower instrument cover.


Hide 83210 19.INSTALL TACHOGRAPH ASSEMBLY (w/ Tachograph)

Hide 55601C 20.INSTALL INSTRUMENT PANEL UNDER TRAY SUB-ASSEMBLY

a.

Attach the clamp and connect the connector.


b.

w/ Tachograph:

i.

Connect the connector.


ii.

Attach the 4 claws to install the instrument panel under tray sub-assembly with the 2 screws <D> and 2 screws.



c.

w/o Tachograph:

Attach the 4 claws to install the instrument panel under tray sub-assembly with the 4 screws <D>.


Hide 55470 21.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

a.

Connect each connector.


b.
B377338E01
0.552,0.26 0.865,0.458 0.313,0.198 10 false *a

Insert the first claw and then attach the 9 claws in the order shown in the illustration.

Text in illustration
*a First Claw


c.
B467564

Attach the 17 claws and 4 guides indicated by the arrow in the order shown in the illustration to install the instrument cluster finish panel garnish assembly.


Hide 55480D 22.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

a.
B467628

for LHD, w/ Fuel lid opener:

Attach the 3 claws to connect the fuel lid lock control cable assembly.


b.

Connect each connector.


c.

Attach the 7 claws to install the lower instrument panel finish panel assembly.


d.

Install the bolt <B>.


Hide 55845B 23.INSTALL REAR NO. 3 HEATER TO REGISTER DUCT (w/ Heater)

a.

Install the rear No. 3 heater to register duct with the 2 clips.


Hide 55521C 24.INSTALL STEREO OPENING COVER (w/o Microphone)

a.

Install the stereo opening cover with the 2 screws.


Hide 86290A 25.INSTALL MICROPHONE AMPLIFIER ASSEMBLY (w/ Microphone)

Hide 55412D 26.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL

a.

w/ Outer Mirror Control Switch:

Attach the 2 clamps and connect the connector.


b.

Attach the 3 guides and 9 claws to install the center instrument cluster finish panel.


Hide 86250 27.INSTALL AMPLIFIER MICROPHONE ASSEMBLY (w/ Microphone)

Hide 55433B 28.INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

a.

Attach the 15 claws to install the lower No. 2 instrument panel finish panel.


Hide 58841A 29.INSTALL SHIFTING HOLE COVER (for Automatic Transmission)

Hide 58848A 30.INSTALL SHIFT LEVER HOLE COVER (for Manual Transmission)

Hide 33555D 31.INSTALL SHIFT LEVER BOOT (for Manual Transmission)

Hide 58534A 32.INSTALL TRANSMISSION COVER MAT (for Manual Transmission)

Hide 33504F 33.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

a.

Gently rotate the shift lever knob sub-assembly by hand until it locks.


b.

After locking, further tighten by 1.5 turns.


c.

After tightening, rotate and adjust the tightened direction so that the shift pattern is positioned within +/-10° of the front of the vehicle.


Hide 62211 34.INSTALL FRONT PILLAR GARNISH RH

Hide 62212 35.INSTALL FRONT PILLAR GARNISH LH

HINT:

Use the same procedure described for the RH side.


Hide 62311C 36.CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH

a.

Connect the front door opening trim weatherstrip RH.

Click hereVehicle Interior>INTERIOR>ROOF HEADLINING>INSTALLATION


Hide 74603 37.INSTALL FRONT ASSIST GRIP SUB-ASSEMBLY

Hide 74617V 38.INSTALL ASSIST GRIP PLUG

Hide 39.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION