Home › Audio / Visual / Telematics › AUDIO / VIDEO › MICROPHONE › 2017.01–2019.08
RM2850E _56 Audio / Visual / Telematics _073196 AUDIO / VIDEO _0356226 MICROPHONE A

AUDIO / VIDEO  MICROPHONE  INSTALLATION  


PROCEDURE

Hide 86259A 1.INSTALL MICROPHONE HANGER

a.
E367400

Move the microphone hanger in the direction indicated by the arrow shown in the illustration, attach the guide and claw and install the microphone hanger.


Hide 55412D 2.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL

Hide 58841A 3.INSTALL SHIFTING HOLE COVER (for Automatic Transmission)

Hide 58123A 4.INSTALL SHIFT AND SELECT LEVER SUPPORT (for Manual Transmission)

a.

Install the shift lever hole cover with the 4 bolts.


Hide 58286 5.INSTALL NO. 1 SHIFT AND SELECT LEVER BOOT (for Manual Transmission)

a.

for RHD:

Install the shift lever boot with the 3 bolts.


b.

for LHD:

Install the shift lever boot with the 4 bolts.


Hide 58534A 6.INSTALL TRANSMISSION COVER MAT (for Manual Transmission)

a.

Install the transmission cover mat to the shift and select lever support.


Hide 33504F 7.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

a.

Gently rotate the shift lever knob sub-assembly by hand until it locks.


b.

After locking, further tighten by 1.5 turns.


c.

After tightening, rotate and adjust the tightened direction so that the shift pattern is positioned within +/-10° of the front of the vehicle.


Hide 86250 8.INSTALL AMPLIFIER MICROPHONE ASSEMBLY

a.
E367401

Insert the amplifier microphone assembly into the microphone hanger and connect the plug to install it.