1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
88310A
2.REMOVE NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT
3.SEPARATE COMPRESSOR AND MAGNET CLUTCH
Remove the 2 bolts and separate the air conditioning hose and accessory.
Disconnect the connector.
Remove the 4 bolts and separate the compressor and magnet clutch together with the 2 air conditioning hose and accessories.
Do not apply excessive force to the 2 air conditioning hose and accessories.
88720A
4.DISCONNECT AIR CONDITIONING HOSE AND ACCESSORY
Remove the bolt and disconnect the discharge hose.
Remove the O-ring from the discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
Remove the bolt and disconnect the suction hose.
Remove the O-ring from the suction hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.