1. RUN ENGINE AT IDLE SPEED WITH A/C ON FOR APPROX. 10 MINUTES
2. STOP ENGINE
3.DISCONNECT NEGATIVE CABLE TO BATTERY
4. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
5.REMOVE ENGINE SERVICE HOLE COVER
6. LOOSEN IDLE PULLEY LOCK NUT AND REMOVE COMPRESSOR DRIVE BELT
7.REMOVE SUCTION HOSE AND DISCHARGE HOSE FROM COMPRESSOR
Cap the open fittings immediately to keep the moisture and dust out of the system.
8.REMOVE COMPRESSOR
Disconnect the connector from magnetic clutch.
(14B Engine)
Remove the 4 bolts and the compressor.
(1 HZ Engine)
Remove the 4 bolts from the compressor.
(1 HZ Engine)
Remove the 3 bolts and the idle pulley bracket.
(1 HZ Engine)
Remove the 5 bolts and the compressor bracket.
(1 HZ Engine)
Remove the compressor.