Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
62989
1.REMOVE CENTER DOOR LOCK COVER
69405C
2.REMOVE CENTER DOOR INSIDE LOOK STOPPER SUB-ASSEMBLY
Put a matchmark at the position where the center door inside lock stopper sub-assembly is installed as shown in the illustration.
|
Matchmark |
Disconnect the connector.
Remove the 2 nuts and center door inside lock stopper sub-assembly.
84231A
3.REMOVE COURTESY LIGHT SWITCH
Remove the courtesy light switch from the center door inside lock stopper sub-assembly.