Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
84231A
1.INSTALL COURTESY LIGHT SWITCH
Install the courtesy light switch to the center door inside lock stopper sub-assembly.
9.9 N*m (101 kgf*cm, 88 in.*lbf)
69405C
2.INSTALL CENTER DOOR INSIDE LOOK STOPPER SUB-ASSEMBLY
Temporarily install the center door inside lock stopper sub-assembly with the 2 nuts.
Align the center door inside lock stopper sub-assembly to the matchmark and tighten the 2 nuts.
4.0 N*m (41 kgf*cm, 35 in.*lbf)
|
Matchmark |
Connect the connector.
62989
3.INSTALL CENTER DOOR LOCK COVER