75431A
1.INSTALL NO. 1 BACK DOOR EMBLEM
67882C
2.INSTALL NO. 2 BACK DOOR WEATHERSTRIP
Attach the 9 clips to install the No. 2 back door weatherstrip.
67881A
3.INSTALL BACK DOOR WEATHERSTRIP
Remove any non-drying sealer on the body with non-residue solvent.
Temporarily install the new back door weatherstrip.
When installing, make sure no non-drying sealer is applied to the body or luggage door.
Attach the 2 clips to install the back door weatherstrip.
69560A
4.INSTALL BACK DOOR LOCK CYLINDER ASSEMBLY
Install the back door lock cylinder assembly as indicated by the arrows in the order shown in the illustration.
69350
5.INSTALL BACK DOOR LOCK ASSEMBLY
Install the 2 bolts and back door lock assembly in the direction indicated by the arrow in the illustration.
7.5 N*m (76 kgf*cm, 66 in.*lbf)
6.INSTALL BACK DOOR OUTSIDE GARNISH
7.INSTALL CLIP (w/o Back Door Trim Board)
Install the 2 clips.
67751
8.INSTALL BACK DOOR TRIM BOARD (w/ Back Door Trim Board)
Attach the 15 clips to install the back door trim board.